Hi, I have an input Buffer and I need to devolope IBIS model for this.It is having 2 modes in MODE_1 it acts as a analog differential input Buffer (A and AZ are differential inputs and Y as output). MODE_2 it acts as non-differential input Buffer (A is the only input since AZ must be floating and Y is the output). If I generate models for these how do I include these in a single component? Why because MODE_1 having Pin structure A and AZ along with [Diffpin] and MODE_2 having Pin structure only A and not [DiffPin]. And [DiffPin] key word will be having influence on Non-differential Model i.e MODE_2. Thanks Regards kiran Confidentiality Notice The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain confidential or privileged information. If you are not the intended recipient, please notify the sender at Wipro or Mailadmin@wipro.com immediately and destroy all copies of this message and any attachments. |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993Received on Wed Mar 30 02:12:54 2005
This archive was generated by hypermail 2.1.8 : Wed Mar 30 2005 - 02:15:57 PST