Re: [IBIS-Users] logic0 and logic1 problem in IBIS models

Hello Tom,

Yes, I agree with you but I find out most of the simulator not follow 
this rule for differential cells and fails to give correct logic labels. 
Is any other way by which it calculate for differential cells.

Regards
Akhilesh

Tom Dagostino wrote:

>Akhilesh
>
>The logic 1 and logic 0 states depend on the load attached to the buffer.
>If the load is an open circuit then the logic 0 will be the voltage in the
>pulldown table where the current is zero.  The 1 will be the voltage in the
>pullup table where the current is zero.  You can construct load lines and
>apply those to the IV tables to predict the output voltage for any load.
>
>Regards,
>
>Tom Dagostino
>Teraspeed Labs
>13610 SW Harness Lane
>Beaverton, OR 97008
>503-430-1065
>http://www.teraspeed.com
>tom@teraspeed.com
>
>Teraspeed Consulting Group LLC
>121 North River Drive
>Narragansett, RI 02882
>401-284-1827
>
>Teraspeed is the registered service mark of
>Teraspeed Consulting Group LLC
>
>-----Original Message-----
>From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org]On
>Behalf Of Akhilesh CHANDRA
>Sent: Monday, April 11, 2005 8:09 AM
>To: ibis-users@eda.org
>Cc: Akhilesh CHANDRA
>Subject: [IBIS-Users] logic0 and logic1 problem in IBIS models
>
>
>
>Hello ,
>
>  I am working on one of my differential cells. When I validate my IBIS
>models from two different simulator then I got two different logic 0 and
>logic1 values. To find out it's problem of simulator or my models I must
>know what are the logic0 and logic1 according to the models. Can any one
>have any idea how we can extract logic0 and logic1 from the model files.
>
>  I am highly blocked due to this issue. Your help is deeply appreciated.
>
>Regards
>Akhilesh
>
>|------------------------------------------------------------------
>|For help or to subscribe/unsubscribe, email majordomo@eda.org
>|with just the appropriate command message(s) in the body:
>|
>|  help
>|  subscribe   ibis       <optional e-mail address, if different>
>|  subscribe   ibis-users <optional e-mail address, if different>
>|  unsubscribe ibis       <optional e-mail address, if different>
>|  unsubscribe ibis-users <optional e-mail address, if different>
>|
>|or email a written request to ibis-request@eda.org.
>|
>|IBIS reflector archives exist under:
>|
>|  http://www.eda.org/pub/ibis/email_archive/  Recent
>|  http://www.eda.org/pub/ibis/users_archive/  Recent
>|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
>
>|------------------------------------------------------------------
>|For help or to subscribe/unsubscribe, email majordomo@eda.org
>|with just the appropriate command message(s) in the body:
>|
>|  help
>|  subscribe   ibis       <optional e-mail address, if different>
>|  subscribe   ibis-users <optional e-mail address, if different>
>|  unsubscribe ibis       <optional e-mail address, if different>
>|  unsubscribe ibis-users <optional e-mail address, if different>
>|
>|or email a written request to ibis-request@eda.org.
>|
>|IBIS reflector archives exist under:
>|
>|  http://www.eda.org/pub/ibis/email_archive/  Recent
>|  http://www.eda.org/pub/ibis/users_archive/  Recent
>|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
>  
>


|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993