Dear ALL,
I already solve the previous problem. That just a small bug in IBIS. I just need to correct it manually and it will be fine.
Here, I got another questions.
Do anyone know what will cause [PULLUP] and [PULLDOWN] will have 0 current flow from -1.8v to 1.8v? I shared my datas below.
-1.8000 0.000A 0.000A 0.000A
-1.7000 0.000A 0.000A 0.000A
.
.
.
1.7000 0.000A 0.000A 0.000A
1.8000 0.000A 0.000A 0.000A
1.9000 14.6800uA 14.9900uA 14.2500uA
2.0000 15.7200uA 16.0200uA 15.2900uA
And why this errors will occur?
ERROR - Model IO31: The [Rising Waveform]
with [R_fixture]=70 Ohms and [V_fixture_min]=0V
has MIN column DC endpoints of 0.00V and 0.00v, but
an equivalent load applied to the model's I-V tables yields
different voltages (-0.90V and 0.00V),
a difference of -100.04% and 66.57%, respectively.
ERROR - Model IO31: The [Falling Waveform]
with [R_fixture]=70 Ohms and [V_fixture_max]=0V
has MAX column DC endpoints of 0.00V and 0.00v, but
an equivalent load applied to the model's I-V tables yields
different voltages (-0.90V and 0.00V),
Thanks
rdgs
yylau
This archive was generated by hypermail 2.1.8 : Fri May 06 2005 - 15:24:44 PDT