RE: [IBIS-Users] Confused about clamp data in pull-up/down

From: De Paepe, Kristiaan <kristiaan.depaepe_at_.....>
Date: Mon Jun 27 2005 - 01:26:12 PDT
Thank you all,
All your answers and tips have allowed me to finally make sense of it all.
Kind regards,
Kristiaan

- - - - - - - DISCLAIMER- - - - - - - -
Unless indicated otherwise, the information contained in this message is
privileged and confidential, and is intended only for the use of the
addressee(s) named above and others who have been specifically authorized to
receive it. If you are not the intended recipient, you are hereby notified
that any dissemination, distribution or copying of this message and/or
attachments is strictly prohibited. The company accepts no liability for any
damage caused by any virus transmitted by this email. Furthermore, the
company does not warrant a proper and complete transmission of this
information, nor does it accept liablility for any delays. If you have
received this message in error, please contact the sender and delete the
message. Thank you.

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
Received on Mon Jun 27 01:26:23 2005

This archive was generated by hypermail 2.1.8 : Mon Jun 27 2005 - 01:28:01 PDT