Hello Sivaram, You can do one think use .save feature in your simulator. First apply a transient at i/p and see when your o/p is at steady state after this just use ,save feature to save voltage at all input node. you can save these voltage in one file and use this file in your simulation. It will give you good results. Regards Akhilesh Subramanian, Sivaramakrishnan (Sivaramakrishnan) wrote: > Hi all, > > How can I extract V-I curves when the O/P of my buffer is edge-triggered > and not level-sensitive? > > Basically, I have to do DC sweep to extract these curves.But I cannot > connect my inputs to steady voltage values as the O/P is > edge-triggered, which > needs transient analysis. > > Would anyone of you please let me know how to go about these buffers > to extract > VI curves? > > Thanks in advance, > Sivaram > > > |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993Received on Tue Jul 5 06:59:18 2005
This archive was generated by hypermail 2.1.8 : Tue Jul 05 2005 - 06:59:33 PDT