Hello, Fabio, The waveforms are normally generated with resistance around 50 ohms (typical transmission line impedance). 1Kohm is too big. You might also want to use s2ibis3, since several bugs and algorithmic errors were fixed in the new version. Best regards, Lynne "IBIS training when you need it, where you need it." Dr. Lynne Green Green Streak Programs http://www.greenstreakprograms.com 425-788-0412 lgreen22@mindspring.com -----Original Message----- From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf Of Fabio BRINA Sent: Friday, January 20, 2006 6:56 AM To: ibis-users; ibis Subject: [IBIS-Users] WARNING Endpoint Hi IBIS experts, when I check my IBIS model I optain these warning: WARNING - Model 'mod_out': TYP AC Rising Endpoints ( 0.00V, 4.97V) not within 0.099V (2%) of ( 3.11V, 3.94V) on VI curves for 1000 Ohms to 0V WARNING - Model 'mod_out': TYP AC Falling Endpoints ( 0.02V, 5.00V) not within 0.100V (2%) of ( 3.14V, 3.96V) on VI curves for 1000 Ohms to 5V I know what it means, but I don't know if I have to modify the R_fixture to eliminate it ( I fix R_fix=1k from the datasheet ). morever in some IBIS editor this Warning became an Error ! so I don't know if is an acceptable Warning. ( I use s2ibis2 v.2.1 ) What do you think about? many thanks Another type of question: About IBIS Summit ( DATE 06 ), there is an expiry date to register on them? thanks again. Fabio. |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org with just |the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993 |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993Received on Fri Jan 20 08:06:59 2006
This archive was generated by hypermail 2.1.8 : Fri Jan 20 2006 - 08:09:33 PST