Hi , If we have a IO pad which works in the different applications depending on the load applied on it, then do we to provide V-t waveforms(more than normal 4 curves) for different applications with different load settings.? Or can we specify that loading conditions under Rref, Vref and Cref for that model. Which one is preferable. ? I tested my model with Hyperlynx SI tool and it is not identifying the Rref and Vref values that I am specifying in my model. It will only take Cref and Vmeas while doing simulations. In that case we can't specify the loading conditions under Vref, Cref and Vref but we need to give all possible V-t curve combinations for different loading conditions. Please let me know your reply. PS : I am also waiting for the reply to my previous mail regarding Common Mode Voltage Range support in IBIS . Best Regards, Sudarshan HN NXP Semiconductors/CTO /PLT C-4, Manyata Tech Park, Nagawara Bangalore-560 045 , India. Ph:+91-80-40267073 Fax: +91-80-4026 7855 seri:sudarsha@inpsblr E-mail: sudarshan.honnudike@nxp.com -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Tue Jan 9 21:35:16 2007
This archive was generated by hypermail 2.1.8 : Tue Jan 09 2007 - 21:37:40 PST