RE: [IBIS-Users] any EDA tool can support .pkg ibis model?

From: Xuefeng Chen <Xuefeng.Chen_at_.....>
Date: Thu Mar 22 2007 - 19:31:50 PDT
Hi Eric,

      HSPICE can support IBIS model with package model.  But I think other EDA tools may also support it with their own usages.

      So at first, please check if you use it with right usage.

Regards

Xuefeng  

 

________________________________

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf Of Eric Hsu
Sent: 2007Äê3ÔÂ23ÈÕ 10:16
To: ibis-users@eda.org; ibis-users@eda.org
Subject: [IBIS-Users] any EDA tool can support .pkg ibis model?

 

Hi IBIS expert,

 

Is there any EDA tool can really simulate 3.2 version ibis model with package model (*.pkg)? Right now, I can not use Hyperlynx 7.2 to run simulation for it. The following format is an example:

 

[IBIS Ver]              3.2

[Comment Char]          |_char

[File Name]             abc.pkg

[File Rev]              1.0

[Date]                  March 22, 2007

[Source]                abc Corporation's result.

[Notes]            a

[Disclaimer]        a

[Copyright]          a

|

| insert package model from here to ibis

[Define Package Model]  abc

[Manufacturer]        a  

[OEM]                  a 

[Description]           a

|

[Number Of Pins]        1

|

[Pin Numbers]

a1 len=0 L=1n /

len=1.1 L=0.1n R=0.1 C=1p /

len=0 L=1n R=0.1 C=1p /

len=1.1 L=0.1n R=0.1 C=1p /

len=0 L=1n R=0.1 C=1p /

|

[End Package Model]

| end insertion

[End]

 

Because I am not sure whether EDA tool does support ¡°stub¡± (red highlight) portion, if any one can provide your experience, I will very appreciate!

 

Regards,

 

Eric

 

 


-- 
This message has been scanned for viruses and 
dangerous content by MailScanner <http://www.mailscanner.info/> , and is 
believed to be clean. 

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Thu Mar 22 19:32:15 2007

This archive was generated by hypermail 2.1.8 : Thu Mar 22 2007 - 19:32:27 PDT