Hi Alex: This does seem unusual. I would have expected the total numbers to be closer. So, I would have to look at the file to understand the differences and to see if there is a problem. I am not aware of a 1000 Note limit. Best Regards, Bob Alex Hilbers wrote: > Ibisians, > > I ran a Cyclone 2 model with ibischk4.2.1 and got 10 Warnings, and 1.000 "Notes" on non-monotonicity. > Ibischk4.2.0 gives 1375 Warnings, mostly non-monotonicity. > > Is this ok? > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > Alex Hilbers > Signal Integrity Analysis and Thermal Management, ASML, EDEV department > > Building 7J0005, P.O. Box 324, 5500 AH Veldhoven, The Netherlands > Phone: +31-(0)40-268 5587, Fax: +31-(0)40-268 5530 > Email: alex.hilbers@asml.com, www.asml.com > > > > -----Original Message----- > From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Radovan.Vuletic@qimonda.com > Sent: Wednesday, April 25, 2007 12:56 PM > To: michael.mirmak@intel.com; ibis@eda-stds.org; ibis-users@eda-stds.org > Subject: [IBIS] RE: [IBIS-Users] IBISCHK4 parser updated; IBIS 4.2 now an ANSI specification > > Hi experts, > > is it possible that there is a bug in this latest IBISCHK4 (v4.2.1) version? > > I am checking one IBIS model and then I get a whole bunch of warnings that I can't explain, like: > "WARNING - Pin B1 is not defined as a Diff Pin though the associated Model Selector INOUT was determined to be Differential" > > When is one pin considered to be differential? I assume only in [Diff Pin] section, but now it seems that it is looking for something else .... and I don't know what .... > > With old version of IBISCHK4 (v4.1.1) I get no such funny warnings. > > For your convenience I have attached the outputs of both spelling checkers (parsers). > > Regards, > Radovan > > > ============================================================================== > Qimonda AG > Chairman of the Supervisory Board/ Aufsichtsratsvorsitzender: Peter J. Fischl Management Board/ Vorstand: Kin Wah Loh (Chairman/ Vorsitzender), Dr. Michael Majerus, Thomas J. Seifert Register Court/ Registergericht: München HRB 152545, Seat/ Sitz: München ============================================================================== > > > > > -----Original Message----- > From: owner-ibis-users@server.eda.org [mailto:owner-ibis-users@server.eda.org] On Behalf Of Mirmak, Michael > Sent: Sunday, April 22, 2007 7:53 AM > To: ibis@server.eda-stds.org; ibis-users@server.eda-stds.org > Subject: [IBIS-Users] IBISCHK4 parser updated; IBIS 4.2 now an ANSI specification > > > The IBIS Open Forum is pleased to announce that the IBISCHK4 parser, version 4.2.1, is on-line and available for download! Compiled executables for Linux (SuSE), Microsoft DOS/Windows and Sun operating systems can be found at: > > http://www.eda.org/pub/ibis/ibischk4/ > > Additional compilations will be posted as they become available. Parser license purchasers will receive the source code shortly. > > Note that this version addresses all known parser bugs and implements the new "Caution" flag. > > Parser issues may be reported using the "bugform.txt" template at: > > http://www.eda.org/pub/ibis/bugs/ibis_bugs/ > > Please send completed issue reports to ibis-bug@eda.org. > > In addition, we have received confirmation that, with the close of the comment period, IBIS 4.2 is now an official ANSI specification, as of March 9, 2007! Its official designation is ANSI/EIA-656-B. > > Thanks to our contributors, members and users for their support! > > - Michael Mirmak > Intel Corp. > Chair, EIA IBIS Open Forum > > -- > This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. > > > -------------------------------------------------------------------- > |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org > |with the appropriate command message(s) in the body: > | > | help > | subscribe ibis <optional e-mail address, if different> > | subscribe ibis-users <optional e-mail address, if different> > | unsubscribe ibis <optional e-mail address, if different> > | unsubscribe ibis-users <optional e-mail address, if different> > | > |or e-mail a request to ibis-request@eda-stds.org. > | > |IBIS reflector archives exist under: > | > | http://www.eda-stds.org/pub/ibis/email_archive/ Recent > | http://www.eda-stds.org/pub/ibis/users_archive/ Recent > | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 > > -- > This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. > > -- Bob Ross Teraspeed Consulting Group LLC Teraspeed Labs 121 North River Drive 13610 SW Harness Lane Narragansett, RI 02882 Beaverton, OR 97008 401-284-1827 503-430-1065 http://www.teraspeed.com 503-246-8048 Direct bob@teraspeed.com Teraspeed is a registered service mark of Teraspeed Consulting Group LLC -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Fri Apr 27 09:02:17 2007
This archive was generated by hypermail 2.1.8 : Fri Apr 27 2007 - 09:03:13 PDT