RE: [IBIS-Users] Package Modeling in IBIS -Matrix format

From: Lynne D. Green <lgreen22_at_.....>
Date: Mon Oct 01 2007 - 07:42:26 PDT
Hello, Tim,
 
The IBIS specification has a chapter on the PKG format.
 
The major limitation with PKG format is that it only supports pin-to-pad (no
branching).
 
Best regards,
Lynne
 
 
"IBIS training when you need it, where you need it."
 
Dr. Lynne Green
Green Streak Programs
http://www.greenstreakprograms.com
425-788-0412
lgreen22@mindspring.com


  _____  

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf
Of Ibis Model
Sent: Monday, October 01, 2007 2:54 AM
To: Server EDA
Subject: [IBIS-Users] Package Modeling in IBIS -Matrix format


Hi, 
 
I have come across this IBIS model with the respective package model file
(in .pkg format) and it seem to me that the package information for all RLC
is presented in a matrix format. Is there any available document that can
explain how this numbers can be useful to the user as well as how they play
a role in the simulation? Else, can IBIS open forum helps to explain how
these values are being presented and how can the simulation tools use these
information to verify whether the simulator already included the package
model. 
 
I will be glad if you can point me to any document related to this matrix
RLC package modeling. Appreciate your reply on this. Please find attachement
the package model file. 
 
 
Regards
Tim



  _____  

Take the Internet to Go: Yahoo!Go puts the Internet
<http://us.rd.yahoo.com/evt=48253/*http://mobile.yahoo.com/go?refer=1GNXIC>
in your pocket: mail, news, photos & more. 
-- 
This message has been scanned for viruses and 
dangerous content by  <http://www.mailscanner.info/> MailScanner, and is 
believed to be clean. 


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.




--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Mon Oct 1 07:43:33 2007

This archive was generated by hypermail 2.1.8 : Mon Oct 01 2007 - 07:44:19 PDT