Timmy, You can do it either way, it depends on your needs. If you want to correlate to your SPICE model, match it to that, if you want to correlate to real life, match it to your measurements. Arpad ==================================================== ________________________________ From: owner-ibis@server.eda.org [mailto:owner-ibis@server.eda.org] On Behalf Of Timmy Leon Sent: Thursday, September 25, 2008 8:46 PM To: ibis@server.eda.org Cc: ibis-users@server.eda.org Subject: [IBIS] C_comp value Dear Sir/Madam, I have a question regarding the c_comp value that we should put in IBIS model. Should the c_comp value be based on measurement, or can we tune value so that IBIS model correlate with its spice model or measurements? Thank you. Best regards, Timmy Leon -- This message has been scanned for viruses and dangerous content by MailScanner <http://www.mailscanner.info/> , and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Fri Sep 26 06:10:23 2008
This archive was generated by hypermail 2.1.8 : Fri Sep 26 2008 - 06:10:33 PDT