[IBIS-Users] Query on S2IBIS3

From: dsravi <dsravi_at_.....>
Date: Thu Nov 20 2008 - 20:58:41 PST
Hi S2IBIS users,

While running s2ibis3 (linux version) in the batch mode, execution stops 
during convergence issue, until we enter "y" or "n".
Would you like to specifiy a different sweep range? [y/n]
Let me know is there any possiblity to come out automatically  without 
asking anything.(atleast timeout feature) at this utility.

Thanks,
Ravi


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.



--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Thu Nov 20 21:00:23 2008

This archive was generated by hypermail 2.1.8 : Thu Nov 20 2008 - 21:01:11 PST