Dear Sir/Madam,
As a beginner worked with IBIS model, I met a problem about the
IBIS simulation for a complete device. Let's take an inverter as an example.
If I want to model a complete inverter including the transfer function by
using IBIS, do I just need to simulate the output model only(i.e. does the
output model contain the transfer function) ? or cascade IBIS input model
with output model?
If we need to cascade them, does that mean just to receive the output signal
of the input model as the input signal of the output model?
Thanks and regards,
Ji Yuancheng
-- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Wed Mar 17 08:06:12 2010
This archive was generated by hypermail 2.1.8 : Wed Mar 17 2010 - 08:07:10 PDT