Re: [IBIS-Users] s2ibis2 issue

Hi Syed,

Thanks. I think you have noticed that there are some abnormal data in
the put.out
file. I also listed below:

 20 -0.999999999999998 4.98199344324096
 21 -0.799999999999998 4.12877792596131
 22 -0.599999999999998 4.01970481456261
 23 -0.399999999999998 4.01940828279669
 24 -0.199999999999998 4.02194525365832

So I am mentioning that there may something wrong. Actually I can
correct these data
manually. Do you know any tool to read these output file and gather the
data in to a ibis
file?

Best regards,
Jason

Syed Huq (huqs) wrote:
> Hi Jason,
> Your attached put6.out file is a function of how you setup the .s2i file
> as well as your spice input files.
> The s2ibis2 tool is simply running a spice simulation of your input file
> and producing the output as you see.
> So the problem needs to be debugged.
>
> For example,
> Look at your put6.spi file and check if that is correct.
> For a sanity check, run HSPICE on this file and compare the output to
> your put6.out
>
> If you are not familiar with the translation method, look under the
> /example folder of the installation of s2ibis2 and run those first.
>
> -Syed
>
> -----Original Message-----
> From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On
> Behalf Of Jason Ma
> Sent: Wednesday, May 26, 2010 6:57 PM
> To: ibis-users@eda.org
> Subject: [IBIS-Users] s2ibis2 issue
>
> Dear Sir/Madam,
>
> I am a design engineer working for ADI. I am having a problem when I am
> trying to generate an IBIS model with s2ibis2.
> After run s2ibis2, I read the *.out data and found some abnormal data
> included, please refer to the attachment. So using the ibischk3 for the
> generated ibis model, it showed a lot of error messages. Could you help
> to look at this problem? It will be good if we can generate the output
> file without abnormal data. In another way, I can correct the abnormal
> data manually, and could we use something to put the output file
> together for the ibis model file (*.ibs)? Thanks a million.
>
> Best regards,
> Jason
>
> ************************************************************************
> ******
>
>
> S2IBIS2 VERSION NUMBER: s2ibis2.linux v1.1
>
> PLATFORM (SPARC, HP700, PC, etc.): A Sun Fire X4100 Server, x86_64
>
> OS AND VERSION: Linux 2.6.9-89.0.9.ELsmp #1 SMP
>
> REPORTED BY: Jason
>
> DATE: May 26, 2010
>
> DESCRIPTION OF BUG:
>
> the output file (*.out) contained some abnormal data, and the generated
> ibis file (*.ibs) showed some error messages.
>
> INSERT FILE DEMONSTRATING THE BUG:
>
> put.out
>
> --
> This message has been scanned for viruses and dangerous content by
> MailScanner, and is believed to be clean.
>
>
>

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993