[IBIS-Users] RE: How to handle > 50% correlation

From: Baker, Bonnie <bonnie@ti.com>
Date: Wed Feb 16 2011 - 12:16:54 PST

Estella,

It sounds like you are taking the pull-up and pull-down data for your IBIS model half way through the cycle. When you compare the hspice (IBIS model) to the spice deck you will see this error. I think that you IBIS model rise and fall times are incorrect.

Best Regards,
 
Bonnie Baker

-----Original Message-----
From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Silva, Estella
Sent: Wednesday, February 16, 2011 12:46 PM
To: ibis@eda.org; ibis-users@eda.org
Subject: [IBIS] How to handle > 50% correlation

Hello,

I created an IBIS model of a GPIO cell and correlated the simulation results between using the IBIS model (HSPICE simulation) with the transistor level (spectre simulation).

I used two methods in obtaining the IV and VT curves.

However, the correlation results are 50% off for the risetimes & falltimes for both cases.

Can anyone please advise on what to do in this case?

Thanks & best regards,
Estella

National Semiconductor
(408) 721-7678

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Wed Feb 16 12:17:18 2011

This archive was generated by hypermail 2.1.8 : Wed Feb 16 2011 - 12:17:32 PST