[IBIS-Users] How is the switching edge response implemented in IBIS

Dear Sir/Madam,
As I know, IBIS model has a VT table described the dynamic response of a
buffer for the fastest switching edge.
However, if the input pulse has a quite long rise/fall time (much slower
than its maximum switching rate), how is the IBIS model interpolate the
response during the rise/fall period?
Thanks for your help!

Regards,
Yuancheng

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993