Dear all,
As I know, for solving the SSN problem, IBIS version 5.0 adds section
[composite current] and [ISSO PU/PD]. Then I have some questions:
1. How will the simulator work with the [composite current]? Does it
directly adopt the power terminal current value at the [composite current]
when the input voltage over the threshold voltage? But I feel different
rise/fall time will lead to different current value at the power terminal.
2. The section [ISSO PU/PD] is likely to provide a gate modulation
coefficent on the original output current. In specification, the
Ipu=Kpu(t)*Ipu(Vcc-Vout(t))*Ksso_pu(Vtable_pu) and
Ipd=Kpd(t)*Ipd(Vout(t))*Ksso_pd(Vtabke_pd). so does it mean the total output
current is Ipu+Ipd? how does the simulator decide the value of Kpu(t) and
Kpd(t) according to the data in IBIS file?
Thanks and regards,
Yuancheng
-- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Tue May 31 23:20:18 2011
This archive was generated by hypermail 2.1.8 : Tue May 31 2011 - 23:21:28 PDT