[IBIS-Users] Logic Threshold for min/max cases

From: Fabio BRINA <fabio.brina@st.com>
Date: Fri Mar 02 2012 - 03:23:34 PST

Hello experts,

I was reading about Threshold sub-parameters Vinh , Vinl:

Sometimes the Voltage supply extremes are quite different
from the typical value ( in the ibis generation).
Could be useful (?) , especially for these cases, to define three
 different Threshold values:

Vinl , Vinl_min , Vinl_max
 Vinh , Vinh_min , Vinh_max

(often datasheet have already these different values
  associated to the VCC typ, min, max cases)

What your opinion about this?
Could these info improve synchronism?

Best Regards,
Fabio

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Fri Mar 2 03:24:34 2012

This archive was generated by hypermail 2.1.8 : Fri Mar 02 2012 - 03:25:11 PST