[IBIS-Users] Question regarding IBIS for current source type IO

From: Chetan Kumar <Chetan.Kumar@nxp.com>
Date: Sat Nov 03 2012 - 09:20:07 PDT
Hi All,

Currently I have an IO which basically works like an current source. The IO can be programmed to source/sink current upto 32 levels. The polarity of the current can be changed based upon internal pin setting. Can I generate IBIS for such a cell. If it is possible then should I model it as a open source type or an output type?

Thanks and Best Regards
Chethan Kumar


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org
|or ibis-request@eda-stds.org
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/ibis/email_archive/ Recent
|  http://www.eda-stds.org/ibis/users_archive/ Recent
|  http://www.eda-stds.org/ibis/email/         E-mail since 1993
Received on Sat Nov 3 09:20:35 2012

This archive was generated by hypermail 2.1.8 : Sat Nov 03 2012 - 09:21:13 PDT