[IBIS-Users] RE: [IBIS] Overclocking effect with composite current

From: Joy Li <joyli@cadence.com>
Date: Mon Feb 03 2014 - 11:45:48 PST
Hi Rinsha,

At this time, there is no further documentation available publicly.

To enable the industry to consolidate on a single approach, we may at some time in the future disclose more details concerning our approach to the IBIS committee for consideration as part of the standard or best practices documentation.

Joy Li
Cadence

From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Rinsha Reghunath
Sent: Monday, February 03, 2014 9:29 AM
To: ibis@eda.org; ibis-users@eda.org
Subject: [IBIS] Overclocking effect with composite current

Hello,

The following paper discusses about the solution for overclocking with composite current: http://www.eda.org/ibis/summits/nov13c/sun.pdf

Is there any other documentation further explaining this technique or could someone please give more insight on this?

Thanks,
Rinsha

--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org
|or ibis-request@eda-stds.org
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/ibis/email_archive/ Recent
|  http://www.eda-stds.org/ibis/users_archive/ Recent
|  http://www.eda-stds.org/ibis/email/         E-mail since 1993
Received on Mon Feb 3 11:46:37 2014

This archive was generated by hypermail 2.1.8 : Mon Feb 03 2014 - 11:47:13 PST