Dear sir, i'm new to ibis tool we use s2ibis3 version when i convert it to .ibis file. If we add one output pin like this | spice_node signal_name model_name [Pin] out DP out OUTPUT -> in in DIN in dummy gnd gnd gnd GND vdd25 vdd25 vdd25 POWER " NO ERROR " Occur. But we add two Output pin like this | spice_node signal_name model_name [Pin] out_dp DP out_dp OUTPUT_DP -> in out_dn DN out_dn OUTPUT_DN -> in in DIN in dummy gnd gnd gnd GND vdd25 vdd25 vdd25 POWER It shows an "ERROR" "This Model Needs PullupData .. CurrentPin is .. out_dp Do the TYP run in GenerateVITable Starting Spectre job with input putout_dp.spi Error java.io.FileNotFoundException: putout_dp.out (No such file or directory) Error in running Spectre Error in running Spectre A spice engine needed to run s2ibis3 is missing. Check s2ibis3.log to get more information". But if we run with a single model and with single output pin no error occur please help me to clear this error. Thanks & Regards, Bala Sekar -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org |or ibis-request@eda-stds.org | |IBIS reflector archives exist under: | | http://www.eda-stds.org/ibis/email_archive/ Recent | http://www.eda-stds.org/ibis/users_archive/ Recent | http://www.eda-stds.org/ibis/email/ E-mail since 1993Received on Fri Jun 6 20:38:49 2014
This archive was generated by hypermail 2.1.8 : Fri Jun 06 2014 - 20:39:33 PDT