Re: [IBIS-Users] true differential buffer IBIS modelling

From: Shivani Sharma <shivanis1406@gmail.com>
Date: Mon Sep 29 2014 - 08:51:07 PDT
Hi Arpad

Since "Series Model" does not support reactive elements, what would be a
good way to model L and/or C present between inverting and non-inverting
pins of any true differential buffer? Specifically w.r.t IBIS-AMI, could we
consider taking s parameters of Tx and rx buffers?

thanks
Shivani

On Thu, Sep 18, 2014 at 7:38 PM, Muranyi, Arpad <Arpad_Muranyi@mentor.com>
wrote:

>  Shivani,
>
>
>
> 1)  Yes.
>
> 2)  Look at the 3D surface of Idiff, as shown in fig. 4.16 on
>
> pg. 36 in the IBIS cookbook
> http://www.eda.org/ibis/cookbook/cookbook-v4.pdf.
>
> If the surface is flat, i.e. its edges are straight you have
>
> a linear (resistive) differential current.  (It doesn’t have
>
> to be horizontal, but it should not have a curvature to it in
>
> any direction).  In this case you can use [R Series].  If there
>
> is a curvature in one or two directions, you will need to use
>
> [Series Current] or [Series MOSFET].  We do not model reactive
>
> characteristics with I-V curves, so L and C doesn’t come into
>
> this picture.
>
> 3)  Vds is the voltage between the non-inverting and inverting terminals
>
> of the buffer.  Look at pg. 51 in the IBIS Cookbook to see the
>
> explanation for Vtable.
>
> 4)  Sorry, I do not have an example for you.
>
>
>
> I hope this helps.
>
>
>
> Arpad
>
> ===========================================================================
>
>
>
>
>
> *From:* owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] *On
> Behalf Of *Shivani Sharma
> *Sent:* Thursday, September 18, 2014 4:04 AM
> *To:* ibis-users@eda.org
> *Cc:* mikelabonte@eda-stds.org
> *Subject:* [IBIS-Users] true differential buffer IBIS modelling
>
>
>
> Hi all
>
>
>
> i have a couple of queries related to IBIS modelling of truely
> differential buffers
>
>
>
> Please see-> http://www.shivanis14.blogspot.in/
>
>
>
> Thanks
>
> Shivani
>
>
>
>
> --
> This message has been scanned for viruses and
> dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is
> believed to be clean.
>
> --
> This message has been scanned for viruses and
> dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is
> believed to be clean.
>

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org
|or ibis-request@eda-stds.org
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/ibis/email_archive/ Recent
|  http://www.eda-stds.org/ibis/users_archive/ Recent
|  http://www.eda-stds.org/ibis/email/         E-mail since 1993
Received on Mon Sep 29 08:51:21 2014

This archive was generated by hypermail 2.1.8 : Mon Sep 29 2014 - 08:52:25 PDT