Subject: RE: [IBIS] Terminated buffer
From: Ingraham, Andrew (Andrew.Ingraham@hp.com)
Date: Thu Oct 10 2002 - 08:48:19 PDT
Arghh! It must have been before my first morning coffee had taken effect!
As Weston Beal correctly informed me, my earlier reply was wrong. I wrote the wrong keywords.
The [Power Clamp] and [GND Clamp] sections are the two sections that can describe built-in terminations.
Andy
Wrong info.:
> The Pullup and/or Pulldown clamp I-V curves should describe anything that is always in the circuit, including leakage currents, terminations, etc.
>
> If the termination is independent of the supply, put it into the Pulldown curve. If it tracks with the supply, use the Pullup curve, or a combination of both.
>
-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Thu Oct 10 2002 - 08:57:31 PDT