Subject: [IBIS] Question on Rising/Falling Tables...
From: arsenault, brian (arsenault_brian@emc.com)
Date: Thu Oct 24 2002 - 05:51:18 PDT
> We've recently received a model from a semiconductor that has the
> Rising/Falling waveforms with the first datapoint at a time other than
> 0ns. While the IBIS spec states that this is OK, one of our tool vendors
> conversion utilities fails when reading the model. This passes IBISCHK3
> and imports into other tools fine.
>
> My question is, if this was your model and the model vendor wasn't fixing
> it, how would you handle it?
>
> Thanks for the help.
>
> Brian
-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Thu Oct 24 2002 - 06:03:43 PDT