Subject: RE: [IBIS] IBIS model development course
From: Ingraham, Andrew (Andrew.Ingraham@hp.com)
Date: Thu Oct 31 2002 - 05:33:12 PST
>I'm looking for recommendation of a course in IBIS model development and
>validation preferable in Europe.
About a week ago, there was an announcement here about an *on-line*
IBIS model development seminar. As such, it should be accessible almost
anywhere in the world.
The brief description sounds like it is tailored more toward model
validation, than model creation. But that's the more important part.
:-)
> Free IBIS seminar on the internet (webinar).
>
> November 6, 2002: "IBIS Modeling and Validation." Presented by Dr. Lynne
> Green, Cadence.
> Information and registration:
> http://www.cadencepcb.com/webinar/modeling/frmmodeling.asp
-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Thu Oct 31 2002 - 06:40:37 PST