Re: [IBIS] HyperLynx


Subject: Re: [IBIS] HyperLynx
From: Mohammad Ali (mohammad.ali@tellabs.com)
Date: Thu Oct 31 2002 - 07:01:47 PST


This is true. But the major limitation with ICX3.0 I found is that it
does not
allow encrypted spice IO models. Unfortunately, almost all IC vendors
provide
only encrypted IO models(& transistor library) even under NDA
disclosure
and they only runs with Avanti! hpsice tool. I can't take advantage of
the
new ICX3.0 spice feature in such circumstances. However, the old feature
of
extracting the topology in spice format, hooking up spice models
externally and
running under hspice is a work around solution for the above limitation.

-Mohammad

modelStacy L Gore wrote:
>
> Another alternative is the new Mentor ICX3.0 which can co-simulate IBIS and
> SPICE (and VHDL-AMS) models without the need of an external SPICE simulator
> or license.
>
> Stacy L. Gore
> Hardware Engineering Staff
> Raytheon - Garland Site
> Phone - (972) 205-4208
> Fax - (972) 205-4445
>
>
> Mohammad Ali
> <mohammad.ali@te To: Shee Kian Wong <SKWONG@altera.com>
> llabs.com> cc: ibis@server.eda.org
> Sent by: Subject: Re: [IBIS] HyperLynx
> owner-ibis@serve
> r.eda.org
>
>
> 10/31/2002 08:10
> AM
>
>
>
> > Shee Kian Wong wrote:
> >
> Cadence Specctraquest has a new feature that allow users to mix IBIS
> and SPICE IO models and perform pre- and post-layout analysis. The
> only pre-requisite for this is
>
> 1. a hspice licence should be available
> 2. need some preliminary work to build a macro models for both IBIS
> and spice with some wrap-around lines.
>
> I have successfully used this approach recently.
>
> -Mohammad
>
> > Hi all,
> >
> > Can HyperLynx simulate both IBIS and SPICE models (for example, using
> > SPICE models as driver and IBIS models as receiver)?
> >
> > If it can't, can anyone suggest a tool that can perform this?
> >
> > Regards,
> >
> > Shee Kian
>
> --
> ================================================================
> Mohammad W. Ali, Ph.D. Phone 630.378.8924
> Tellabs Operations, Inc. Fax 630.378.8994
> 1000 Remington Blvd. Cell 630.430.1806
> Bolingbrook, IL 60440 Email Mohammad.Ali@tellabs.com
> ================================================================
> ============================================================
> The information contained in this message may be privileged
> and confidential and protected from disclosure. If the
> reader of this message is not the intended recipient, or an
> employee or agent responsible for delivering this message to
> the intended recipient, you are hereby notified that any
> reproduction, dissemination or distribution of this
> communication is strictly prohibited. If you have received
> this communication in error, please notify us immediately by
> replying to the message and deleting it from your computer.
>
> Thank you.
> Tellabs
> ============================================================
> -----------------------------------------------------------------
> |For help or to subscribe/unsubscribe, email majordomo@eda.org
> |with the appropriate command message(s) in the body:
> |
> | help
> | subscribe ibis <optional e-mail address, if different>
> | subscribe ibis-users <optional e-mail address, if different>
> | unsubscribe ibis <optional e-mail address, if different>
> | unsubscribe ibis-users <optional e-mail address, if different>
> |
> |or email a request to ibis-request@eda.org.
> |
> |IBIS reflector archives exist under:
> |
> | http://www.eda.org/pub/ibis/email_archive/ Recent
> | http://www.eda.org/pub/ibis/users_archive/ Recent
> | http://www.eda.org/pub/ibis/email/ E-mail since 1993

-- 
================================================================
Mohammad W. Ali, Ph.D.         Phone 630.378.8924
Tellabs Operations, Inc.       Fax   630.378.8994
1000 Remington Blvd.           Cell  630.430.1806
Bolingbrook, IL 60440          Email Mohammad.Ali@tellabs.com
================================================================
============================================================
The information contained in this message may be privileged 
and confidential and protected from disclosure.  If the 
reader of this message is not the intended recipient, or an 
employee or agent responsible for delivering this message to 
the intended recipient, you are hereby notified that any 
reproduction, dissemination or distribution of this 
communication is strictly prohibited. If you have received 
this communication in error, please notify us immediately by 
replying to the message and deleting it from your computer.

Thank you. Tellabs ============================================================ ----------------------------------------------------------------- |For help or to subscribe/unsubscribe, email majordomo@eda.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993



This archive was generated by hypermail 2b28 : Thu Oct 31 2002 - 07:08:40 PST