Subject: RE: [IBIS] IV curve question...
From: Angulo, John (john_angulo@mentorg.com)
Date: Fri Nov 01 2002 - 12:47:10 PST
True, but Matt's asking for an easy way to see the combined curves at a glance.
The Visual IBIS Editor, a free tool for the IBIS community from Mentor, does this. Go to: http://www.mentor.com/pads/hyperlynx/visibis.html (the link from the IBIS web page is temporarily broken). With version 3.0, you can view plots of pullup or pulldown combined with the power clamp or ground clamp table, respectively. In the very near future, version 3.1 will show both clamps summed together with either the pullup or pulldown curves.
Best regards,
John Angulo
Hyperlynx Products
Mentor Graphics Corp.
john_angulo@mentor.com
425-869-2320
-----Original Message-----
From: Silva, Benjamin P [mailto:benjamin.p.silva@intel.com]
Sent: Friday, November 01, 2002 11:24 AM
To: ruston, matt; Ingraham, Andrew
Cc: ibis@server.eda.org
Subject: RE: [IBIS] IV curve question...
The simulator should do that automagically.
Ben
-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Fri Nov 01 2002 - 12:55:56 PST