Subject: Re: [IBIS] IV curve question...
From: Al Davis (aldavis@ieee.org)
Date: Sun Nov 03 2002 - 00:48:06 PST
On Friday 01 November 2002 11:32 am, ruston, matt wrote:
> Andy:
>
> Hi. The non-monotonicity is attributable to the separation
> of the various clamp and pulldown curves. I added the clamp
> curves back in (in Excel) and the curves looked normal.
Of course! When the clamp current is kilo-amps and the
pulldown current is milli-amps, any error in the pulldown
current is masked. You could substitute random noise and it
would still look good by that measure.
-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Sun Nov 03 2002 - 00:53:45 PST