Subject: [IBIS] IBIS models for Intel LXT971A and LXT9785 Ethernet PHYs
From: Hassan Ali (Hassan.Ali@fidus.ca)
Date: Mon Feb 10 2003 - 12:50:05 PST
I've obtained IBIS models "lxt971a_q_mii_3_31.ibs" and "lxt9785_q_rmii_3_3.ibs" of the above-mentioned devices through the following link:
http://www.intel.com/design/network/products/ethernet/linecard_ept.htm
Unfortunately the IBIS model for LXT9785 device does not show which I/O models should be used for the 100Mbps pins: TPFOP, TPFON, TPFIP, TPFIN. The IBIS model for LXT971A does not show the I/O models for the TPFOP, TPFON pins.
I need the models for those pins to be able to perform signal integrity analysis of a magneticless link through a backplane.
Does anyone have info on the missing models? Are those the right IBIS model files for my analysis?
Thanks.
Hassan.
-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Mon Feb 10 2003 - 12:59:45 PST