re: [IBIS] waveform fixtures for differential models


Subject: re: [IBIS] waveform fixtures for differential models
From: Lynne Green (lgreen@cadence.com)
Date: Mon Sep 29 2003 - 14:41:29 PDT


Hi, Mike-

This should work fine in Cadence SPECCTRAQuest.

- Lynne

Dr. Lynne Green
Senior Member of Consulting Staff
Cadence Design Systems, Inc.

"All the world's an analog stage, whereon digital plays bit parts."
Fred Field, Hughes Aircraft

---Original Message-----
From: Mike LaBonte [mailto:milabont@cisco.com]
Sent: Monday, September 29, 2003 4:34 PM
To: IBIS
Subject: [IBIS] waveform fixtures for differential models

We have encountered IBIS models with only 1 rising and 1 falling
waveform, each with V_fixture set to 1/2 of power voltage. These are for
differential buffers where the termination voltage is effectively the
midpoint, so it seems to make sense. My question is, will all IBIS
simulators simulate this model correctly? Or are there simulators that
absolutely require waveforms with V_fixture at both power and ground
levels?

Mike LaBonte

-----------------------------------------------------------------
-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993



This archive was generated by hypermail 2b28 : Mon Sep 29 2003 - 14:42:39 PDT