[IBIS] Mult-Lingual Model Support in IBIS

Hi all,

When I use this feature in Component, I found if an analog I/O port
mapped to
an explicit die pad, it is no other statement to map this explicit die
pad to a pin
listed under [Pin] keyword. Furthermore, I do not know which port in
[External Circuit]
is an analog I/O port, since analog port in [External Circuit] has not
reserved keyword
names to indicate its character. Although keyword "Signal_pin" and
"Diff_signal_pins"
give a mapping from an analog I/O port to a pin, which port is the right
I/O port ??
So from my understand, I can not construct a connection between an
analog I/O port within
[External Circuit] and a pin listed under [Pin] keyword if using
explicit die pad.
Could anybody give me some explanations or advices ?

Thanks very much
slwu

-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
Received on Tue Nov 9 17:48:16 2004