Hi, I have noticed this as well. This is for either Solaris or Linux that when you have dt numbers in pico-seconds, the 'p' has a gap. I believe the number itself is ok (you should verify) and get around the bug by deleting the 'gap'. The R_pkg, L_pkg and C_pkg values are picked up form the .s2i file. These are not used by s2ibis2 )in simulation I mean) so not sure why you have gap for the unit as well. - Syed On Mon, 2005-03-07 at 00:50, Vivek Kumar Sundriyal wrote: > Syed , > > I tried the new version. There are some minor bugs that i notice. > > In the .ibs file that is generated, i get the following errors : > dV/dt_r 1.8875/61.3678 p 1.6680/0.1332n 2.0800/48.3146 p > dV/dt_f 1.9070/59.6731 p 1.6785/0.1374n 2.0972/42.3047 p > > (notice the gaps while printing the "p"...IBISCHK gives an obvious error) > > Under the [package] keyword > R_pkg 18.3600 m 16.5000 m 21.2000 m > (here too notice the gaps in printing the "m") > > -- Vivek > > > > > > > "Syed Huq" > <shuq@cisco.com> To: "Vivek Kumar Sundriyal" <Vivek.Kumar.Sundriyal@nsc.com> > Sent by: cc: ibis <ibis@eda.org>, ibis-users <ibis-users@eda.org>, > owner-ibis-users@ owner-ibis-users@eda.org > eda.org Subject: Re: [IBIS] [IBIS-Users] s2ibis2.linux > > > 03/05/05 07:09 AM > > > > > > > Hi Vivek, > > I have uploaded a new version of the Linux binary. Pls download one more > time and try it out. Let me know if you have any problems: > > http://www.eda.org/pub/ibis/s2ibis/s2ibis2_v1.1/ > > % file s2ibis2.linux > s2ibis2.linux: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), > for GNU/Linux 2.2.5, dynamically linked (uses shared libs), stripped > > This has been tested on RedHat7.3 > > - Syed > > On Fri, 2005-03-04 at 03:33, Vivek Kumar Sundriyal wrote: > > Hi , > > I downloaded the s2ibis2.linux (the one ported by Cisco) from the site > and > > tried to run it on my linux machine. It gives me the following errors : > > > > [[svivek@machine1]] 55 % ls -l s2ibis2.linux > > -rwxr-xr-x 1 svivek wheel 134588 Mar 4 15:27 s2ibis2.linux* > > [[svivek@machine1]] 56 % ./s2ibis2.linux > > ./s2ibis2.linux: Command not found. > > [[svivek@machine1]] 57 % s2ibis2.linux > > s2ibis2.linux: Command not found. > > > > > > Can anyone let me know what the problem is ? > > > > Do I have to recompile the source code provided by Cisco ? > > > > -- Thanks > > > > Vivek > > > > > > > > > > > "Vivek Kumar > > > Sundriyal" To: ibis > <ibis@eda.org>, ibis-users@eda.org, > > <Vivek.Kumar.Sundriy owner-ibis-users@eda.org > > > al@nsc.com> cc: > > > Sent by: Subject: [IBIS-Users] > s2ibis2 for linux > > owner-ibis-users@eda > > > .org > > > > > > > > > 03/04/05 11:22 AM > > > > > > > > > > > > > > > > > Hi , > > > > I was trying to make s2ibis2 compile on linux. But I see some > differences > > in the results of the IBIS files generated by the solaris version and the > linux > > version . > > > > Are there any issues with comiling the source code with Liinux ? Or am I > > gng wrong somewhere ? > > > > > > Thanks , > > > > Vivek > > > > > > > > > > |------------------------------------------------------------------ > > |For help or to subscribe/unsubscribe, email majordomo@eda.org > > |with just the appropriate command message(s) in the body: > > | > > | help > > | subscribe ibis <optional e-mail address, if different> > > | subscribe ibis-users <optional e-mail address, if different> > > | unsubscribe ibis <optional e-mail address, if different> > > | unsubscribe ibis-users <optional e-mail address, if different> > > | > > |or email a written request to ibis-request@eda.org. > > | > > |IBIS reflector archives exist under: > > | > > | http://www.eda.org/pub/ibis/email_archive/ Recent > > | http://www.eda.org/pub/ibis/users_archive/ Recent > > | http://www.eda.org/pub/ibis/email/ E-mail since 1993 > > > > > > > > > > > > ----------------------------------------------------------------- > > |For help or to subscribe/unsubscribe, email majordomo@eda.org > > |with the appropriate command message(s) in the body: > > | > > | help > > | subscribe ibis <optional e-mail address, if different> > > | subscribe ibis-users <optional e-mail address, if different> > > | unsubscribe ibis <optional e-mail address, if different> > > | unsubscribe ibis-users <optional e-mail address, if different> > > | > > |or email a request to ibis-request@eda.org. > > | > > |IBIS reflector archives exist under: > > | > > | http://www.eda.org/pub/ibis/email_archive/ Recent > > | http://www.eda.org/pub/ibis/users_archive/ Recent > > | http://www.eda.org/pub/ibis/email/ E-mail since 1993 > |------------------------------------------------------------------ > |For help or to subscribe/unsubscribe, email majordomo@eda.org > |with just the appropriate command message(s) in the body: > | > | help > | subscribe ibis <optional e-mail address, if different> > | subscribe ibis-users <optional e-mail address, if different> > | unsubscribe ibis <optional e-mail address, if different> > | unsubscribe ibis-users <optional e-mail address, if different> > | > |or email a written request to ibis-request@eda.org. > | > |IBIS reflector archives exist under: > | > | http://www.eda.org/pub/ibis/email_archive/ Recent > | http://www.eda.org/pub/ibis/users_archive/ Recent > | http://www.eda.org/pub/ibis/email/ E-mail since 1993 > > ----------------------------------------------------------------- |For help or to subscribe/unsubscribe, email majordomo@eda.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993Received on Mon Mar 7 09:25:03 2005
This archive was generated by hypermail 2.1.8 : Mon Mar 07 2005 - 09:25:37 PST