Hi IBIS experts, I have a Buffer structure with an Output pin. for some reason on this output pin is connected a GND clamp diode. Can I set [Model type] = I/O to characterize also this diode? or I have to set [Model type] = Output ? In the first case ( I/O type ) can I have I-V and V-t maching problems? many thanks Best Regards, Fabio ----------------------------------------------------------------- |For help or to subscribe/unsubscribe, email majordomo@eda.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993Received on Mon Jan 30 02:32:32 2006
This archive was generated by hypermail 2.1.8 : Mon Jan 30 2006 - 02:38:48 PST