[IBIS] ICM 1.1 approved as an ANSI standard!

From: Mirmak, Michael <michael.mirmak_at_.....>
Date: Thu Feb 23 2006 - 19:21:28 PST
The IBIS Open Forum is pleased to announce that the IBIS Interconnect
Modeling Specification (ICM), version 1.1 has been standardized through
the American National Standards Institute (ANSI), as of January 18,
2006.  Confirmation from ANSI can be viewed through
http://public.ansi.org/ansionline/Documents/Standards%20Action/SAV3703.p
df.

Official copies of the new standard, ANSI/GEIA STD-0001-2006, are
available through ANSI (http://www.ansi.org), GEIA (http://www.geia.org)
and other document distribution services.

- Michael Mirmak
  Intel Corp.
  Chair, EIA IBIS Open Forum

  http://www.eigroup.org/ibis/
  http://www.eda.org/ibis/

-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
Received on Thu Feb 23 19:21:33 2006

This archive was generated by hypermail 2.1.8 : Thu Feb 23 2006 - 19:26:32 PST