[IBIS] [GND_CLAMP] and [POWER_CLAMP] measurement for LVDS differential buffer

From: Yu-Shen Yang <yushen.yang_at_.....>
Date: Wed Sep 13 2006 - 16:06:00 PDT
Hi All,

In cookbook 4.0. the measurement setup for pullup and pulldown IV-Curve have
been described.
My question is that is  GND_CLAMP and  POWER_CLAMP followed by the same
method?
and the difference is to  disable the buffer ? Thanks


Yu-Shen Yang

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Wed Sep 13 16:06:04 2006

This archive was generated by hypermail 2.1.8 : Wed Sep 13 2006 - 16:06:27 PDT