To All: We have been holding successful European IBIS Summit Meetings for the past nine years. This year we are again holding a meeting along with DATe 07 on Thursday, April 19, 2007. The purpose is to promote communication among users and developers of IBIS models in Europe. The meeting is free and open to everyone The meeting is sponsored by ZUKEN, Agilent Technologies, Cadence Design Systems and Mentor Graphics Corporation to cover room costs and refreshments, thanks to all sponsors which allow to make this event happen. Below is the planned Agenda, although some additional talks may be scheduled. You are invited to register and participate the meeting. While pre-registration for refeshment sizing is preferred, feel free to show up if you are available. NOTE to Presenters: Because of our full schedule, we have to ask you to limit your total time to 25 minutes including questions and discussion. Ralf Bruening Product Manager High Speed Design Solutions ZUKEN EMC Technology Center ----------------------------------------------------------------------------------- AGENDA, EUROPEAN IBIS SUMMIT MEETING Thursday, April 19, 2007 Novotel Nice Centre (across the street from Nice-Acropolis Congress and Exhibition Center) Nice, France Room: Cheret ------------------------------------------------------------------ 8:30 REFRESHMENTS & SIGN IN 9:00 WELCOME AND INTRODUCTIONS Ralf Bruening, Zuken, Germany 9:10 From IBIS to Electromagnetic Compatibility Prediction of Integrated Circuits Etienne Sicard, National Institute of Applied Science (INSA), France 9:35 IdEM and Mpilog: Macromodeling Tools for System-Level Signal Integrity and EMC Assessment Igor Stievano, Politecnico di Torino, Italy 10:00 Experiences with Driver Schedules Eckhard Lenski, Nokia Siemens Network GmbH, Germany 10:25 BREAK (15 Minutes) 10:40 Gate Modulation Solution Validated by VHDL-AMS Implementation Antonio Girardi, Giacomo Bernardi, and Roberto Izzi, STMicroelectronics, Italy 11:05 Forward Looking Trends in SERDES Modeling Eric Rongere and Stephane Rousseau, Mentor Graphics, France 11:30 Mixed Signal Channel Modelling Approach to SI Analysis Saliou Dieye and Riccardo Giacometti, Agilent Technologies, France 11:55 IBIS Models with Reactive Loads Manfred Maurer, Siemens AG, Germany 12:30 Closing Remarks (and other short reports and/or discussion if schedule permits) Ralf Bruening, Zuken, Germany 12:45 END OF MEETING ------------------------------------------------------------------ REGISTRATION INFORMATION People involved in IBIS Model development, EDA tool development, and digital circuit design are invited to participate to the Summit meeting. If you plan to participate, please register with the information below: Name: E-mail address: Company: Telephone: Send to: Ralf Bruening (ralf.bruening@zuken.de) ------------------------------------------------------------------ SPONSORS: Agilent Technologies, Cadence Design Systems, Mentor Graphics Corporation, and Zuken LIST OF NEARBY HOTELS See <http://www.date-conference.com/conference/travel.htm> for travel directions, hotels and other information. ___________________________________________ Ralf Bruening Product Manager High Speed Design/Partner & Solution Business Zuken EMC Technology Center Vattmannstr.3 33100 Paderborn - Germany Tel: ++49 (0) 5251 150 600 (direct -621) Fax: ++49 (0) 5251 150 700 Cellular: +49 170 4228512 (alternative: +49 172 9070675) Email: ralf.bruening@zuken.de Web: http://www.zuken.com Zuken Gesellschaft mit beschränkter Haftung Sitz der Gesellschaft: Hallbergmoos Register: Amtsgericht München HBR 108421 Geschäftsführer: Jinya Katsube, Gerhard Lipski _____________________________________________ This message is for the designated recipient only and may contain privileged, proprietary, or otherwise private information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the email by you is prohibited. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Fri Apr 13 05:12:15 2007
This archive was generated by hypermail 2.1.8 : Fri Apr 13 2007 - 05:13:35 PDT