Ibisians, I ran a Cyclone 2 model with ibischk4.2.1 and got 10 Warnings, and 1.000 "Notes" on non-monotonicity. Ibischk4.2.0 gives 1375 Warnings, mostly non-monotonicity. Is this ok? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Alex Hilbers Signal Integrity Analysis and Thermal Management, ASML, EDEV department Building 7J0005, P.O. Box 324, 5500 AH Veldhoven, The Netherlands Phone: +31-(0)40-268 5587, Fax: +31-(0)40-268 5530 Email: alex.hilbers@asml.com, www.asml.com -----Original Message----- From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Radovan.Vuletic@qimonda.com Sent: Wednesday, April 25, 2007 12:56 PM To: michael.mirmak@intel.com; ibis@eda-stds.org; ibis-users@eda-stds.org Subject: [IBIS] RE: [IBIS-Users] IBISCHK4 parser updated; IBIS 4.2 now an ANSI specification Hi experts, is it possible that there is a bug in this latest IBISCHK4 (v4.2.1) version? I am checking one IBIS model and then I get a whole bunch of warnings that I can't explain, like: "WARNING - Pin B1 is not defined as a Diff Pin though the associated Model Selector INOUT was determined to be Differential" When is one pin considered to be differential? I assume only in [Diff Pin] section, but now it seems that it is looking for something else .... and I don't know what .... With old version of IBISCHK4 (v4.1.1) I get no such funny warnings. For your convenience I have attached the outputs of both spelling checkers (parsers). Regards, Radovan ============================================================================== Qimonda AG Chairman of the Supervisory Board/ Aufsichtsratsvorsitzender: Peter J. Fischl Management Board/ Vorstand: Kin Wah Loh (Chairman/ Vorsitzender), Dr. Michael Majerus, Thomas J. Seifert Register Court/ Registergericht: München HRB 152545, Seat/ Sitz: München ============================================================================== -----Original Message----- From: owner-ibis-users@server.eda.org [mailto:owner-ibis-users@server.eda.org] On Behalf Of Mirmak, Michael Sent: Sunday, April 22, 2007 7:53 AM To: ibis@server.eda-stds.org; ibis-users@server.eda-stds.org Subject: [IBIS-Users] IBISCHK4 parser updated; IBIS 4.2 now an ANSI specification The IBIS Open Forum is pleased to announce that the IBISCHK4 parser, version 4.2.1, is on-line and available for download! Compiled executables for Linux (SuSE), Microsoft DOS/Windows and Sun operating systems can be found at: http://www.eda.org/pub/ibis/ibischk4/ Additional compilations will be posted as they become available. Parser license purchasers will receive the source code shortly. Note that this version addresses all known parser bugs and implements the new "Caution" flag. Parser issues may be reported using the "bugform.txt" template at: http://www.eda.org/pub/ibis/bugs/ibis_bugs/ Please send completed issue reports to ibis-bug@eda.org. In addition, we have received confirmation that, with the close of the comment period, IBIS 4.2 is now an official ANSI specification, as of March 9, 2007! Its official designation is ANSI/EIA-656-B. Thanks to our contributors, members and users for their support! - Michael Mirmak Intel Corp. Chair, EIA IBIS Open Forum -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -- The information contained in this communication and any attachments is confidential and may be privileged, and is for the sole use of the intended recipient(s). Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please notify the sender immediately by replying to this message and destroy all copies of this message and any attachments. ASML is neither liable for the proper and complete transmission of the information contained in this communication, nor for any delay in its receipt. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Fri Apr 27 05:44:25 2007
This archive was generated by hypermail 2.1.8 : Fri Apr 27 2007 - 05:45:43 PDT