Akhilesh, There is an article on EDN that discusses this topic. I agree with Tony by asking "why do you need correlation?" See attached. Best Regards, Bonnie Baker ________________________________ From: owner-ibis@eda.org on behalf of Dunbar, Tony Sent: Mon 5/14/2007 11:52 AM To: ibis@eda-stds.org Subject: RE: [IBIS] How we can model startup time in IBIS. Hi Akhilesh, I've pondered this for a little while and all I can come up with is to ask why is this an important or even relevant functional detail to be included in a signal integrity simulation, presuming it is a signal integrity simulation you are wanting to do? An "initial delay" can be incorporated into the stimulus of some SI simulators but that is really intended to provide for driver-to-driver skew, whereas your brief description refers to "startup". Regards, Tony -----Original Message----- From: owner-ibis@server.eda.org [mailto:owner-ibis@server.eda.org] On Behalf Of Akhilesh CHANDRA Sent: Monday, May 14, 2007 4:18 AM To: ibis@server.eda-stds.org Cc: Akhilesh CHANDRA Subject: [IBIS] How we can model startup time in IBIS. Hello Experts, I am doing IBIS model of an IO operating at 800MHZ frequency. It have startup time of 3nsec. After 3ns design gives output of 800mhz frequency. If I model this time in waveform database of IBIS models the I have over clocking issue and design is not work at this high frequency. Can you help me to model this startup time. Is anyone make IBIS model of such designs. Regards Akhilesh -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2.1.8 : Mon May 14 2007 - 18:12:05 PDT