RE: [IBIS] ESD pad (ANA) IBIS model

Vishrant,

You can use the IBIS "Terminator" [Model]
type to model that.

Arpad
============================================ 

-----Original Message-----
From: owner-ibis@server.eda.org [mailto:owner-ibis@server.eda.org] On
Behalf Of Vishrant GOYAL
Sent: Thursday, December 13, 2007 12:46 AM
To: ibis@server.eda-stds.org
Cc: vishrant.goyal@st.com
Subject: [IBIS] ESD pad (ANA) IBIS model

Hello expert,

I have an IBIS model of USB PHY (ANA pad is not connected during 
development),
now I want to develop top IBIS which is having USB PHY connected with 
ANA pad (ANA pad has only ESD diode protection).

So how could I develop standalone IBIS model of ANA pad, which has only 
ESD protection circuit.
Is it possible??
If yes then which parameters and curves I need to extract for ANA pad 
IBIS model.

Thanks & Regards,
Vishrant GOYAL

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993