[IBIS] How to generate IBIS models for Relay:

Hello Sir,

1. I was asked about IBIS model generation for Relays, Diodes, Sockets 
and Connectors.

2. Please can you help me about how IBIS models can be generated for 
above components.
   Does current IBIS standard supports all the above components. How can 
Relay characteristics be described in
   current IBIS models. Also if possible please send an example file.

3. I also read about ICM (IBIS InterConnect Models) models. What are 
these models. Will the Relay and Socket are considered as connectors.

Please do help me in this regard.

Thanking you
Shrikant GK


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993