I have an inver output PAD( crystal oscillator), the polarity of input and output is invert, Could IBIS model can describe this kind of buffer? And if it can, how to do it? The output waveforms will be different with normal.(such as pull down curve shoud look like pull up curve)? Thanks a lot!! bi -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Tue Dec 16 10:37:49 2008
This archive was generated by hypermail 2.1.8 : Tue Dec 16 2008 - 10:38:38 PST