Hello,
This is a question to the authors of BIRD 144.
I am trying to figure out the motivation for this BIRD,
because IBIS-ISS does have Touchstone support and in my
BIRD 116 I made a proposal for incorporating IBIS-ISS as
a language for [External Model] and [External Circuit].
Is there a specific reason you want to add (direct) support
for Touchstone files in these keywords directly (without
going through IBIS-ISS subcircuits), or were you simply
not aware of BIRD 116 proposing the same capabilities
through IBIS-ISS?
Thanks,
Arpad
=========================================================
-- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Mon Oct 10 12:04:55 2011
This archive was generated by hypermail 2.1.8 : Mon Oct 10 2011 - 12:05:42 PDT