Timing parameters

Subject: Timing parameters
From: Gang Huo (ghuo@lsil.com)
Date: Wed Nov 14 2001 - 08:06:44 PST

• Next message: Dagostino, Tom: "RE: Timing parameters"
• Previous message: Peters, Stephen: "Agenda, IBIS Open Forum Meeting 11/16"
• Next in thread: Dagostino, Tom: "RE: Timing parameters"
• Reply: Dagostino, Tom: "RE: Timing parameters"
• Reply: Syed Huq: "RE: Timing parameters"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hello all,

I am wondering what can be put in these parameters (Vref, Rref, Cref and
Vmeas) if there is no spec. or the spec. does not specifying the delay
and/or output switching time? And if there is multi-cases in the spec.?
For example, a device's spec. specified/characterized the delay for a
capacitor load to ground ranging from 15pF to 100pF with 4 cases of
15pF, 30pF, 66pF and 100pF.

Thanks.

Huo,Gang

• Next message: Dagostino, Tom: "RE: Timing parameters"
• Previous message: Peters, Stephen: "Agenda, IBIS Open Forum Meeting 11/16"
• Next in thread: Dagostino, Tom: "RE: Timing parameters"
• Reply: Dagostino, Tom: "RE: Timing parameters"
• Reply: Syed Huq: "RE: Timing parameters"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b28 : Wed Nov 14 2001 - 08:38:19 PST