Subject: Re: Ibis Tools?
From: Mark Bossard (mbossard@atmel.com)
Date: Wed Jan 23 2002 - 12:26:50 PST
Arpad,
I apologize for not stating my question more clearly.
I work with ASICs, so my involvement with IBIS is generating IBIS models
for I/O using HSPICE simulations. For our purposes, we don't generate
models on the chip scale with package parameters because the packages
and buffer pinout change from project to project.
What I am looking for are leads to investigate what tools are available
to simulatate using IBIS models and/or assist in the tasks of verifying
that the models we generate. I am trying to make sure our IBIS models
are usable by our customers as well as accurate.
I do use HSPICE to do some IBIS model simulations, but I am interested
at looking at other tools as well.
-Mark Bossard
"Muranyi, Arpad" wrote:
>
> Mark,
>
> I am not sure if I understood your question correctly,
> but there are many tools that can use IBIS models.
> HSPICE, Cadence, Interconnectix, XTK, just to name a
> few. Regarding verification, you can use these tools
> to run simulations that have the same conditions as
> your measurements in the lab, and then you can
> overlay the waveforms either in these tools, or using
> EXCEL, or other graphical plotting tools.
>
> Arpad Muranyi
> Intel Corporation
> ======================================================
>
> -----Original Message-----
> From: Mark Bossard [mailto:mbossard@atmel.com]
> Sent: Wednesday, January 23, 2002 8:07 AM
> To: ibis-users@server.eda.org
> Subject: Ibis Tools?
>
> Hi,
>
> What tools are available (and for what operating systems) to use and
> verify IBIS models?
>
> Thanks in advance,
>
> Mark Bossard
>
> --
>
> ========================================================================
> | Mark Bossard | Atmel Corporation |
> | Direct Phone: (410) 423-4352 | Chesapeake Design Center |
> | Main Phone: (410) 423-4300 | 8820 Columbia 100 Parkway |
> | Fax: (410) 423-4302 | Suite 300 |
> | Email: mbossard@atmel.com | Columbia, MD 21045 |
> ========================================================================
--======================================================================== | Mark Bossard | Atmel Corporation | | Direct Phone: (410) 423-4352 | Chesapeake Design Center | | Main Phone: (410) 423-4300 | 8820 Columbia 100 Parkway | | Fax: (410) 423-4302 | Suite 300 | | Email: mbossard@atmel.com | Columbia, MD 21045 | ========================================================================
This archive was generated by hypermail 2b28 : Wed Jan 23 2002 - 13:02:21 PST