Subject: [IBIS-Users] Positive Ground Clamp Curve
From: Timothy Coyle (Timothy.Coyle@nsc.com)
Date: Wed Mar 27 2002 - 07:57:40 PST
I am trying to gain ground clamp curve data for an input buffer. I do a
DC sweep on the input pin and measure the current. However,
I get positive current. I am using HSPICE. Is there a current convention
thing going on in HSPICE or is something else wrong?
Thanks in advance for any info.
Tim
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Wed Mar 27 2002 - 08:37:21 PST