Subject: [IBIS-Users] I-V vs V-T curves
From: Timothy Coyle (Timothy.Coyle@nsc.com)
Date: Fri Apr 19 2002 - 11:23:59 PDT
Hi,
I am trying to determine where my mismatch end points are coming from in
an IBIS file I am creating. How do I get the end points from the pullup
and pulldown I-V data
so I can compare them to the endpoints in my V-T curves? (load condition
for V-T data is 50 ohms to 1.2V with endpoints 1.0V and 1.4V)
Thanks,
Tim
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Fri Apr 19 2002 - 11:55:38 PDT