[IBIS-Users] model generating issue

Subject: [IBIS-Users] model generating issue
From: Eric Hsu (ehsu@netlogicmicro.com)
Date: Tue Oct 15 2002 - 17:50:57 PDT

• Next message: Al Davis: "Re: [IBIS-Users] Making Pullup curves VCC relative."
• Previous message: Syed Huq: "Re: [IBIS-Users] model generation issue"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

Fisrt, when using s2ibis2 to generate ibis file(ver 2.1), should I take
off "stand-alone" esd dummy diodes, which are not part of output buffer
but just only for enhancing esd protection?
Second, is there any free tool to generate ibis file for ver 3.2 or 4.1?

Best Regards

-eric

• text/x-vcard attachment: Card for Eric Hsu

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993

• Next message: Al Davis: "Re: [IBIS-Users] Making Pullup curves VCC relative."
• Previous message: Syed Huq: "Re: [IBIS-Users] model generation issue"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b28 : Tue Oct 15 2002 - 17:58:53 PDT