Subject: Re: [IBIS-Users] version issue
From: Syed Huq (shuq@cisco.com)
Date: Wed Oct 16 2002 - 12:18:19 PDT
SSTL2, HSTL, LVDS etc all can be descrined within v2.1
The answer to the 2nd question is also yes. You can have v2.1 and v3.2
within the MCM.
Syed
>Date: Wed, 16 Oct 2002 11:50:18 -0700
>From: Eric Hsu <ehsu@netlogicmicro.com>
>X-Accept-Language: en
>MIME-Version: 1.0
>To: ibis-users@eda.org
>Subject: [IBIS-Users] version issue
>
>Hi ,
>
>First, can I use ver2.1 ibis model to describe like SSTL_II I/O buffer?
>If not, which version I should use and what's difference?
>Second, can I use different version ibis model to describe multiple chip
>in the same package? just like "MCM" case? For example, one chip vendor
>perhaps provide v2.1 but the other is v3.2.
>
>-eric
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Wed Oct 16 2002 - 12:24:19 PDT