Subject: Re: [IBIS-Users] characteriztion issue
From: Syed Huq (shuq@cisco.com)
Date: Tue Oct 29 2002 - 12:50:44 PST
If you are eventually going to run the parser on your IO library, you will
need all those headers. You could leave the fields blank in the .s2i file.
I think you need the [IBIS ver] at least..
Syed
>Date: Tue, 29 Oct 2002 12:21:09 -0800
>From: Eric Hsu <ehsu@netlogicmicro.com>
>X-Accept-Language: en
>MIME-Version: 1.0
>To: ibis-users <ibis-users@eda.org>
>Subject: [IBIS-Users] characteriztion issue
>
>Hi all,
>
>In case I wanna use s2ibis2 to generate individual ibis model(ver2.1)
>from IO library, but not including header and component portion ( like
>[IBIS ver], [File name], ...etc.), just model portion ( like [Model],
>[Temperature Range],...etc.). Is there some option I should pick in my
>control file?(*.s2i)
>
>Best Regards,
>
>~eric
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Tue Oct 29 2002 - 12:57:04 PST