Subject: [IBIS-Users] LVDS TERMINATION
From: Laxmi Vishwanathan (laxmi.vishwanathan@sage.latticesemi.com)
Date: Thu Nov 07 2002 - 10:57:51 PST
Hi All,
It looks the my simulations did not show the 100 ohm internal resistor
terminator. It seems that not all simulators support the or take account of
100ohm of internal resistor. Is my understanding correct? If so, the data
cannot be used as it is for IBIS simulation. Please let me know how to
simulation on the differential input, like LVDS and LVPECL?or which
simulators could I use.
thanks,
Laxmi.
Laxmi Vishwanathan
Application Engineer
Lattice Semiconductor
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Thu Nov 07 2002 - 11:09:15 PST